| GNU Classpath (0.95) | |
| Frames | No Frames |
1: /* ImageInputStream.java 2: Copyright (C) 2004, 2005 Free Software Foundation, Inc. 3: 4: This file is part of GNU Classpath. 5: 6: GNU Classpath is free software; you can redistribute it and/or modify 7: it under the terms of the GNU General Public License as published by 8: the Free Software Foundation; either version 2, or (at your option) 9: any later version. 10: 11: GNU Classpath is distributed in the hope that it will be useful, but 12: WITHOUT ANY WARRANTY; without even the implied warranty of 13: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14: General Public License for more details. 15: 16: You should have received a copy of the GNU General Public License 17: along with GNU Classpath; see the file COPYING. If not, write to the 18: Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 19: 02110-1301 USA. 20: 21: Linking this library statically or dynamically with other modules is 22: making a combined work based on this library. Thus, the terms and 23: conditions of the GNU General Public License cover the whole 24: combination. 25: 26: As a special exception, the copyright holders of this library give you 27: permission to link this library with independent modules to produce an 28: executable, regardless of the license terms of these independent 29: modules, and to copy and distribute the resulting executable under 30: terms of your choice, provided that you also meet, for each linked 31: independent module, the terms and conditions of the license of that 32: module. An independent module is a module which is not derived from 33: or based on this library. If you modify this library, you may extend 34: this exception to your version of the library, but you are not 35: obligated to do so. If you do not wish to do so, delete this 36: exception statement from your version. */ 37: 38: 39: package javax.imageio.stream; 40: 41: import java.io.DataInput; 42: import java.io.EOFException; 43: import java.io.IOException; 44: import java.nio.ByteOrder; 45: 46: 47: /** 48: * An input stream for use by {@link javax.imageio.ImageReader 49: * ImageReaders}. 50: * 51: * @since 1.4 52: * 53: * @author Sascha Brawer (brawer@dandelis.ch) 54: */ 55: public interface ImageInputStream 56: extends DataInput 57: { 58: void setByteOrder(ByteOrder order); 59: 60: ByteOrder getByteOrder(); 61: 62: int read() 63: throws IOException; 64: 65: int read(byte[] b) 66: throws IOException; 67: 68: int read(byte[] b, int offset, int length) 69: throws IOException; 70: 71: 72: /** 73: * Reads up to a specified number of bytes, and modifies a 74: * {@link IIOByteBuffer} to hold the read data. 75: * 76: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 77: * before any data is read. 78: * 79: * @param buf an <code>IIOByteBuffer</code> that will hold the read 80: * data. 81: * 82: * @param numBytes the maximum number of bytes to read. 83: * 84: * @throws IndexOutOfBoundsException if <code>numBytes</code> is 85: * negative. 86: * 87: * @throws NullPointerException if <code>buf</code> is 88: * <code>null</code>. 89: * 90: * @throws IOException if some general problem happens with 91: * accessing data. 92: */ 93: void readBytes(IIOByteBuffer buf, int numBytes) 94: throws IOException; 95: 96: 97: /** 98: * Reads a byte and checks whether or not its value is zero. 99: * 100: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 101: * before the byte is read. 102: * 103: * @throws EOFException if the input stream is at its end. 104: * 105: * @throws IOException if some general problem happens with 106: * accessing data. 107: * 108: * @see #readBit() 109: * @see #readByte() 110: * @see #readFully(byte[], int, int) 111: */ 112: boolean readBoolean() 113: throws IOException; 114: 115: 116: /** 117: * Reads a signed byte. 118: * 119: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 120: * before any data is read. 121: * 122: * @throws EOFException if the input stream is at its end. 123: * 124: * @throws IOException if some general problem happens with 125: * accessing data. 126: * 127: * @see #readUnsignedByte() 128: * @see #readFully(byte[], int, int) 129: */ 130: byte readByte() 131: throws IOException; 132: 133: 134: /** 135: * Reads an unsigned byte. 136: * 137: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 138: * before any data is read. 139: * 140: * @throws EOFException if the input stream is at its end. 141: * 142: * @throws IOException if some general problem happens with 143: * accessing data. 144: * 145: * @see #readByte() 146: * @see #readFully(byte[], int, int) 147: */ 148: int readUnsignedByte() 149: throws IOException; 150: 151: 152: /** 153: * Reads an signed 16-bit integer. If necessary, the value gets 154: * converted from the stream’s {@linkplain #getByteOrder() 155: * current byte order}. 156: * 157: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 158: * before any data is read. 159: * 160: * @throws EOFException if the input stream ends before all two 161: * bytes were read. 162: * 163: * @throws IOException if some general problem happens with 164: * accessing data. 165: * 166: * @see #readUnsignedShort() 167: * @see #readChar() 168: * @see #readFully(short[], int, int) 169: */ 170: short readShort() 171: throws IOException; 172: 173: 174: /** 175: * Reads an unsigned 16-bit integer. If necessary, the value gets 176: * converted from the stream’s {@linkplain #getByteOrder() 177: * current byte order}. 178: * 179: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 180: * before any data is read. 181: * 182: * <p>This method does the same as {@link #readChar()}. 183: * 184: * @throws EOFException if the input stream ends before all two 185: * bytes were read. 186: * 187: * @throws IOException if some general problem happens with 188: * accessing data. 189: * 190: * @see #readShort() 191: * @see #readChar() 192: * @see #readFully(char[], int, int) 193: */ 194: int readUnsignedShort() 195: throws IOException; 196: 197: 198: /** 199: * Reads an unsigned 16-bit integer. If necessary, the value gets 200: * converted from the stream’s {@linkplain #getByteOrder() 201: * current byte order}. 202: * 203: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 204: * before any data is read. 205: * 206: * <p>This method does the same as {@link #readUnsignedShort()}. 207: * 208: * @throws EOFException if the input stream ends before all two 209: * bytes were read. 210: * 211: * @throws IOException if some general problem happens with 212: * accessing data. 213: * 214: * @see #readFully(char[], int, int) 215: */ 216: char readChar() 217: throws IOException; 218: 219: 220: /** 221: * Reads a signed 32-bit integer. If necessary, the value gets 222: * converted from the stream’s {@linkplain #getByteOrder() 223: * current byte order}. 224: * 225: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 226: * before any data is read. 227: * 228: * @throws EOFException if the input stream ends before all four 229: * bytes were read. 230: * 231: * @throws IOException if some general problem happens with 232: * accessing data. 233: * 234: * @see #readUnsignedInt() 235: * @see #readFully(int[], int, int) 236: */ 237: int readInt() 238: throws IOException; 239: 240: 241: /** 242: * Reads an unsigned 32-bit integer. If necessary, the value gets 243: * converted from the stream’s {@linkplain #getByteOrder() 244: * current byte order}. 245: * 246: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 247: * before any data is read. 248: * 249: * @throws EOFException if the input stream ends before all four 250: * bytes were read. 251: * 252: * @throws IOException if some general problem happens with 253: * accessing data. 254: * 255: * @see #readInt() 256: * @see #readFully(int[], int, int) 257: */ 258: long readUnsignedInt() 259: throws IOException; 260: 261: 262: /** 263: * Reads a signed 64-bit integer. If necessary, the value gets 264: * converted from the stream’s {@linkplain #getByteOrder() 265: * current byte order}. 266: * 267: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 268: * before any data is read. 269: * 270: * @throws EOFException if the input stream ends before all eight 271: * bytes were read. 272: * 273: * @throws IOException if some general problem happens with 274: * accessing data. 275: * 276: * @see #readFully(long[], int, int) 277: */ 278: long readLong() 279: throws IOException; 280: 281: 282: /** 283: * Reads an IEEE 32-bit single-precision floating point number. If 284: * necessary, the value gets converted from the stream’s 285: * {@linkplain #getByteOrder() current byte order}. 286: * 287: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 288: * before any data is read. 289: * 290: * @throws EOFException if the input stream ends before all four 291: * bytes were read. 292: * 293: * @throws IOException if some general problem happens with 294: * accessing data. 295: * 296: * @see #readFully(float[], int, int) 297: */ 298: float readFloat() 299: throws IOException; 300: 301: 302: /** 303: * Reads an IEEE 64-bit double-precision floating point number. If 304: * necessary, the value gets converted from the stream’s 305: * {@linkplain #getByteOrder() current byte order}. 306: * 307: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 308: * before any data is read. 309: * 310: * @throws EOFException if the input stream ends before all eight 311: * bytes were read. 312: * 313: * @throws IOException if some general problem happens with 314: * accessing data. 315: * 316: * @see #readFully(double[], int, int) 317: */ 318: double readDouble() 319: throws IOException; 320: 321: String readLine() 322: throws IOException; 323: 324: String readUTF() 325: throws IOException; 326: 327: 328: /** 329: * Reads a sequence of signed 8-bit integers into a 330: * <code>byte[]</code> array. 331: * 332: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 333: * before any data is read. 334: * 335: * @param b an array for storing the read values. 336: * 337: * @param offset the index of the first element in <code>b</code> 338: * that will hold read data. 339: * 340: * @param numBytes the number of bytes to read. 341: * 342: * @throws IndexOutOfBoundsException if <code>offset</code> or 343: * <code>numBytes</code> is negative, or if <code>offset + 344: * numBytes</code> exceeds <code>b.length</code>. 345: * 346: * @throws NullPointerException if <code>b</code> is 347: * <code>null</code>. 348: * 349: * @throws EOFException if the input stream ends before all content 350: * was read. 351: * 352: * @throws IOException if some general problem happens with 353: * accessing data. 354: * 355: * @see #readByte() 356: */ 357: void readFully(byte[] b, int offset, int numBytes) 358: throws IOException; 359: 360: 361: /** 362: * Reads a sequence of signed 8-bit integers into a 363: * <code>byte[]</code> array. 364: * 365: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 366: * before any data is read. 367: * 368: * @param b an array for storing the read values. 369: * 370: * @throws NullPointerException if <code>b</code> is 371: * <code>null</code>. 372: * 373: * @throws EOFException if the input stream ends before all content 374: * was read. 375: * 376: * @throws IOException if some general problem happens with 377: * accessing data. 378: * 379: * @see #readByte() 380: * @see #readFully(byte[], int, int) 381: */ 382: void readFully(byte[] b) 383: throws IOException; 384: 385: 386: /** 387: * Reads a sequence of signed 16-bit integers into a 388: * <code>short[]</code> array. If necessary, values are converted 389: * from the stream’s {@linkplain #getByteOrder() current byte 390: * order}. 391: * 392: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 393: * before any data is read. 394: * 395: * @param s an array for storing the read values. 396: * 397: * @param offset the index of the first element in <code>s</code> 398: * that will hold read data. 399: * 400: * @param numShorts the number of signed 16-bit integers to read 401: * (which is one half of the number of bytes). 402: * 403: * @throws IndexOutOfBoundsException if <code>offset</code> or 404: * <code>numShorts</code> is negative, or if <code>offset + 405: * numShorts</code> exceeds <code>s.length</code>. 406: * 407: * @throws NullPointerException if <code>s</code> is 408: * <code>null</code>. 409: * 410: * @throws EOFException if the input stream ends before all content 411: * was read. 412: * 413: * @throws IOException if some general problem happens with 414: * accessing data. 415: * 416: * @see #readShort() 417: */ 418: void readFully(short[] s, int offset, int numShorts) 419: throws IOException; 420: 421: 422: /** 423: * Reads a sequence of unsigned 16-bit integers into a 424: * <code>char[]</code> array. If necessary, values are converted 425: * from the stream’s {@linkplain #getByteOrder() current byte 426: * order}. 427: * 428: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 429: * before any data is read. 430: * 431: * @param c an array for storing the read values. 432: * 433: * @param offset the index of the first element in <code>c</code> 434: * that will hold read data. 435: * 436: * @param numChars the number of unsigned 16-bit integers to read 437: * (which is one half of the number of bytes). 438: * 439: * @throws IndexOutOfBoundsException if <code>offset</code> or 440: * <code>numChars</code> is negative, or if <code>offset + 441: * numChars</code> exceeds <code>c.length</code>. 442: * 443: * @throws NullPointerException if <code>c</code> is 444: * <code>null</code>. 445: * 446: * @throws EOFException if the input stream ends before all content 447: * was read. 448: * 449: * @throws IOException if some general problem happens with 450: * accessing data. 451: * 452: * @see #readChar() 453: */ 454: void readFully(char[] c, int offset, int numChars) 455: throws IOException; 456: 457: 458: /** 459: * Reads a sequence of signed 32-bit integers into a 460: * <code>long[]</code> array. If necessary, values are converted 461: * from the stream’s {@linkplain #getByteOrder() current byte 462: * order}. 463: * 464: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 465: * before any data is read. 466: * 467: * @param i an array for storing the read values. 468: * 469: * @param offset the index of the first element in <code>i</code> 470: * that will hold read data. 471: * 472: * @param numLongs the number of signed 32-bit integers to read 473: * (which is one fourth of the number of bytes). 474: * 475: * @throws IndexOutOfBoundsException if <code>offset</code> or 476: * <code>numInts</code> is negative, or if <code>offset + 477: * numInts</code> exceeds <code>i.length</code>. 478: * 479: * @throws NullPointerException if <code>i</code> is 480: * <code>null</code>. 481: * 482: * @throws EOFException if the input stream ends before all content 483: * was read. 484: * 485: * @throws IOException if some general problem happens with 486: * accessing data. 487: * 488: * @see #readInt() 489: */ 490: void readFully(int[] i, int offset, int numInts) 491: throws IOException; 492: 493: 494: /** 495: * Reads a sequence of signed 64-bit integers into a 496: * <code>long[]</code> array. If necessary, values are converted 497: * from the stream’s {@linkplain #getByteOrder() current byte 498: * order}. 499: * 500: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 501: * before any data is read. 502: * 503: * @param l an array for storing the read values. 504: * 505: * @param offset the index of the first element in <code>l</code> 506: * that will hold read data. 507: * 508: * @param numLongs the number of signed 64-bit integers to read 509: * (which is one eight of the number of bytes). 510: * 511: * @throws IndexOutOfBoundsException if <code>offset</code> or 512: * <code>numLongs</code> is negative, or if <code>offset + 513: * numLongs</code> exceeds <code>l.length</code>. 514: * 515: * @throws NullPointerException if <code>l</code> is 516: * <code>null</code>. 517: * 518: * @throws EOFException if the input stream ends before all content 519: * was read. 520: * 521: * @throws IOException if some general problem happens with 522: * accessing data. 523: * 524: * @see #readLong() 525: */ 526: void readFully(long[] l, int offset, int numLongs) 527: throws IOException; 528: 529: 530: /** 531: * Reads a sequence of IEEE 32-bit single-precision floating point 532: * numbers into a <code>float[]</code> array. If necessary, values 533: * are converted from the stream’s {@linkplain 534: * #getByteOrder() current byte order}. 535: * 536: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 537: * before any data is read. 538: * 539: * @param d an array for storing the read values. 540: * 541: * @param offset the index of the first element in <code>d</code> 542: * that will hold read data. 543: * 544: * @param numFloats the number of IEEE 32-bit single-precision 545: * floating point numbers to read (which is one fourth of the number 546: * of bytes). 547: * 548: * @throws IndexOutOfBoundsException if <code>offset</code> or 549: * <code>numFloats</code> is negative, or if <code>offset + 550: * numFloats</code> exceeds <code>f.length</code>. 551: * 552: * @throws NullPointerException if <code>f</code> is 553: * <code>null</code>. 554: * 555: * @throws EOFException if the input stream ends before all content 556: * was read. 557: * 558: * @throws IOException if some general problem happens with 559: * accessing data. 560: * 561: * @see #readFloat() 562: */ 563: void readFully(float[] f, int offset, int numFloats) 564: throws IOException; 565: 566: 567: /** 568: * Reads a sequence of IEEE 64-bit double-precision floating point 569: * numbers into a <code>double[]</code> array. If necessary, values 570: * are converted from the stream’s {@linkplain 571: * #getByteOrder() current byte order}. 572: * 573: * <p>The {@linkplain #getBitOffset() bit offset} is set to zero 574: * before any data is read. 575: * 576: * @param d an array for storing the read values. 577: * 578: * @param offset the index of the first element in <code>d</code> 579: * that will hold read data. 580: * 581: * @param numDoubles the number of IEEE 64-bit double-precision 582: * floating point numbers to read (which is one eight of the number 583: * of bytes). 584: * 585: * @throws IndexOutOfBoundsException if <code>offset</code> or 586: * <code>numDoubles</code> is negative, or if <code>offset + 587: * numDoubles</code> exceeds <code>d.length</code>. 588: * 589: * @throws NullPointerException if <code>d</code> is 590: * <code>null</code>. 591: * 592: * @throws EOFException if the input stream ends before all content 593: * was read. 594: * 595: * @throws IOException if some general problem happens with 596: * accessing data. 597: * 598: * @see #readDouble() 599: */ 600: void readFully(double[] d, int offset, int numDoubles) 601: throws IOException; 602: 603: long getStreamPosition() 604: throws IOException; 605: 606: int getBitOffset() 607: throws IOException; 608: 609: void setBitOffset(int bitOffset) 610: throws IOException; 611: 612: int readBit() 613: throws IOException; 614: 615: long readBits(int numBits) 616: throws IOException; 617: 618: long length() 619: throws IOException; 620: 621: int skipBytes(int numBytes) 622: throws IOException; 623: 624: long skipBytes(long numBytes) 625: throws IOException; 626: 627: void seek(long pos) 628: throws IOException; 629: 630: void mark(); 631: 632: void reset() 633: throws IOException; 634: 635: void flushBefore(long pos) 636: throws IOException; 637: 638: void flush() 639: throws IOException; 640: 641: long getFlushedPosition(); 642: 643: boolean isCached(); 644: 645: boolean isCachedMemory(); 646: 647: boolean isCachedFile(); 648: 649: void close() 650: throws IOException; 651: }
| GNU Classpath (0.95) |