| GNU Classpath (0.95) | |
| Frames | No Frames |
1: /* MediaPrintableArea.java -- 2: Copyright (C) 2005, 2006 Free Software Foundation, Inc. 3: 4: This file is part of GNU Classpath. 5: 6: GNU Classpath is free software; you can redistribute it and/or modify 7: it under the terms of the GNU General Public License as published by 8: the Free Software Foundation; either version 2, or (at your option) 9: any later version. 10: 11: GNU Classpath is distributed in the hope that it will be useful, but 12: WITHOUT ANY WARRANTY; without even the implied warranty of 13: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14: General Public License for more details. 15: 16: You should have received a copy of the GNU General Public License 17: along with GNU Classpath; see the file COPYING. If not, write to the 18: Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 19: 02110-1301 USA. 20: 21: Linking this library statically or dynamically with other modules is 22: making a combined work based on this library. Thus, the terms and 23: conditions of the GNU General Public License cover the whole 24: combination. 25: 26: As a special exception, the copyright holders of this library give you 27: permission to link this library with independent modules to produce an 28: executable, regardless of the license terms of these independent 29: modules, and to copy and distribute the resulting executable under 30: terms of your choice, provided that you also meet, for each linked 31: independent module, the terms and conditions of the license of that 32: module. An independent module is a module which is not derived from 33: or based on this library. If you modify this library, you may extend 34: this exception to your version of the library, but you are not 35: obligated to do so. If you do not wish to do so, delete this 36: exception statement from your version. */ 37: 38: 39: package javax.print.attribute.standard; 40: 41: import javax.print.attribute.Attribute; 42: import javax.print.attribute.DocAttribute; 43: import javax.print.attribute.PrintJobAttribute; 44: import javax.print.attribute.PrintRequestAttribute; 45: 46: /** 47: * The <code>MediaPrintableArea</code> attribute specifies the area 48: * of a media sheet which is available for printing. 49: * <p> 50: * Due to hardware limitation its not possible with most printers to use the 51: * whole area of a media sheet for printing. This attribute defines the area 52: * for printing through the values of the upper left corner position (x,y) 53: * on the sheet and the available width and height of the area. The units of 54: * the values are determined by two defined constants: 55: * <ul> 56: * <li>INCH - defines an inch</li> 57: * <li>MM - defines a millimeter</li> 58: * </ul> 59: * </p> 60: * <p> 61: * <b>Internal storage:</b><br> 62: * The values of x, y, width and height are stored internally in micrometers. 63: * The values of the provided constants for inch (value 25400) and millimeters 64: * (value 1000) are used as conversion factors to the internal storage units. 65: * To get the internal micrometers values a multiplication of a given 66: * size value with its units constant value is done. Retrieving the size value 67: * for specific units is done by dividing the internal stored value by the 68: * units constant value. 69: * </p> 70: * <p> 71: * <b>IPP Compatibility:</b> MediaPrintableArea is not an IPP 1.1 attribute. 72: * </p> 73: * 74: * @author Michael Koch (konqueror@gmx.de) 75: * @author Wolfgang Baer (WBaer@gmx.de) 76: */ 77: public final class MediaPrintableArea 78: implements DocAttribute, PrintJobAttribute, PrintRequestAttribute 79: { 80: private static final long serialVersionUID = -1597171464050795793L; 81: 82: /** 83: * Constant for the units of inches. 84: * The actual value is the conversion factor to micrometers. 85: */ 86: public static final int INCH = 25400; 87: 88: /** 89: * Constant for the units of millimeters. 90: * The actual value is the conversion factor to micrometers. 91: */ 92: public static final int MM = 1000; 93: 94: /** x in micrometers. */ 95: private int x; 96: /** y in micrometers. */ 97: private int y; 98: /** width in micrometers. */ 99: private int w; 100: /** height in micrometers. */ 101: private int h; 102: 103: /** 104: * Creates a new <code>MediaPrintableArea</code> object with the given 105: * float values for the given units. 106: * 107: * @param x start of the printable area on the sheet in x direction. 108: * @param y start of the printable area on the sheet in y direction. 109: * @param w the width of the printable area. 110: * @param h the height of the printable area. 111: * @param units the units of the given values. 112: * 113: * @throws IllegalArgumentException if x i< 0 or y i< 0 or w i<= 0 114: * or h i<= 0 or units i< 1 115: */ 116: public MediaPrintableArea(float x, float y, float w, float h, int units) 117: { 118: if (x < 0.0f || y < 0.0f || w <= 0.0f || h <= 0.0f) 119: throw new IllegalArgumentException(); 120: 121: this.x = (int) (x * units + 0.5f); 122: this.y = (int) (y * units + 0.5f); 123: this.w = (int) (w * units + 0.5f); 124: this.h = (int) (h * units + 0.5f); 125: } 126: 127: /** 128: * Creates a new <code>MediaPrintableArea</code> object with the given 129: * int values for the given units. 130: * 131: * @param x start of the printable area on the sheet in x direction. 132: * @param y start of the printable area on the sheet in y direction. 133: * @param w the width of the printable area. 134: * @param h the height of the printable area. 135: * @param units the units of the given values. 136: * 137: * @throws IllegalArgumentException if x i< 0 or y i< 0 or w i<= 0 138: * or h i<= 0 or units i< 1 139: */ 140: public MediaPrintableArea(int x, int y, int w, int h, int units) 141: { 142: if (x < 0 || y < 0 || w <= 0 || h <= 0) 143: throw new IllegalArgumentException(); 144: 145: this.x = x * units; 146: this.y = y * units; 147: this.w = w * units; 148: this.h = h * units; 149: } 150: 151: /** 152: * Returns category of this class. 153: * 154: * @return The class <code>MediaPrintableArea</code> itself. 155: */ 156: public Class< ? extends Attribute> getCategory() 157: { 158: return MediaPrintableArea.class; 159: } 160: 161: /** 162: * Returns the name of this attribute. 163: * 164: * @return The name "media-printable-area". 165: */ 166: public String getName() 167: { 168: return "media-printable-area"; 169: } 170: 171: /** 172: * Returns the height of the printable area for the given units. 173: * 174: * @param units the units conversion factor. 175: * @return The height. 176: * 177: * @throws IllegalArgumentException if <code>units</code> is < 1 178: */ 179: public float getHeight(int units) 180: { 181: if (units < 1) 182: throw new IllegalArgumentException("units may not be less than 1"); 183: 184: return h / ((float)units); 185: } 186: 187: /** 188: * Returns the width of the printable area for the given units. 189: * 190: * @param units the units conversion factor. 191: * @return The width. 192: * 193: * @throws IllegalArgumentException if <code>units</code> is < 1 194: */ 195: public float getWidth(int units) 196: { 197: if (units < 1) 198: throw new IllegalArgumentException("units may not be less than 1"); 199: 200: return w / ((float)units); 201: } 202: 203: /** 204: * Returns the position in x direction of the printable area 205: * for the given units. 206: * 207: * @param units the units conversion factor. 208: * @return The position in x direction. 209: * 210: * @throws IllegalArgumentException if <code>units</code> is < 1 211: */ 212: public float getX(int units) 213: { 214: if (units < 1) 215: throw new IllegalArgumentException("units may not be less than 1"); 216: 217: return x / ((float)units); 218: } 219: 220: /** 221: * Returns the position in y direction of the printable area 222: * for the given units. 223: * 224: * @param units the units conversion factor. 225: * @return The position in y direction. 226: * 227: * @throws IllegalArgumentException if <code>units</code> is < 1 228: */ 229: public float getY(int units) 230: { 231: if (units < 1) 232: throw new IllegalArgumentException("units may not be less than 1"); 233: 234: return y / ((float)units); 235: } 236: 237: /** 238: * Tests if the given object is equal to this object. 239: * 240: * @param obj the object to test 241: * 242: * @return <code>true</code> if both objects are equal, <code>false</code> otherwise. 243: */ 244: public boolean equals(Object obj) 245: { 246: if (! (obj instanceof MediaPrintableArea)) 247: return false; 248: 249: MediaPrintableArea tmp = (MediaPrintableArea) obj; 250: 251: return (x == tmp.getX(1) && y == tmp.getY(1) 252: && w == tmp.getWidth(1) && h == tmp.getHeight(1)); 253: } 254: 255: /** 256: * Returns the string representation for this object in units of millimeters.. 257: * <p> 258: * The returned string is in the form "(x,y)->(width,height)mm". 259: * </p> 260: * @return The string representation in millimeters. 261: */ 262: public String toString() 263: { 264: return toString(MM, "mm"); 265: } 266: 267: /** 268: * Returns the hashcode for this object. 269: * 270: * @return The hashcode. 271: */ 272: public int hashCode() 273: { 274: return x ^ y + w ^ h; 275: } 276: 277: /** 278: * Returns the string representation for this object in units of millimeters.. 279: * <p> 280: * The returned string is in the form "(x,y)->(width,height)unitsName". 281: * </p> 282: * @param units the units to use for conversion. 283: * @param unitsName the name of the used units, appended to the resulting 284: * string if not <code>null</code>. 285: * @return The string representation in millimeters. 286: * 287: * @throws IllegalArgumentException if <code>units</code> is < 1 288: */ 289: public String toString(int units, String unitsName) 290: { 291: if (units < 1) 292: throw new IllegalArgumentException("units may not be less than 1"); 293: 294: String tmp = "(" + getX(units) + "," + getY(units) + ")->(" 295: + getWidth(units) + "," + getHeight(units) + ")"; 296: 297: return unitsName == null ? tmp : tmp + unitsName; 298: } 299: 300: /** 301: * Returns the printable area as an float[] with 4 values 302: * (order x, y, width, height) in the given units. 303: * 304: * @param units the units to use. 305: * @return The printable area as float array. 306: */ 307: public float[] getPrintableArea(int units) 308: { 309: return new float[] { getX(units), getY(units), 310: getWidth(units), getHeight(units) }; 311: } 312: }
| GNU Classpath (0.95) |