| GNU Classpath (0.95) | |
| Frames | No Frames |
1: /* 2: * Copyright (c) 2004 World Wide Web Consortium, 3: * 4: * (Massachusetts Institute of Technology, European Research Consortium for 5: * Informatics and Mathematics, Keio University). All Rights Reserved. This 6: * work is distributed under the W3C(r) Software License [1] in the hope that 7: * it will be useful, but WITHOUT ANY WARRANTY; without even the implied 8: * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 9: * 10: * [1] http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231 11: */ 12: 13: package org.w3c.dom; 14: 15: /** 16: * The <code>DOMConfiguration</code> interface represents the configuration 17: * of a document and maintains a table of recognized parameters. Using the 18: * configuration, it is possible to change 19: * <code>Document.normalizeDocument()</code> behavior, such as replacing the 20: * <code>CDATASection</code> nodes with <code>Text</code> nodes or 21: * specifying the type of the schema that must be used when the validation 22: * of the <code>Document</code> is requested. <code>DOMConfiguration</code> 23: * objects are also used in [<a href='http://www.w3.org/TR/2004/REC-DOM-Level-3-LS-20040407'>DOM Level 3 Load and Save</a>] 24: * in the <code>DOMParser</code> and <code>DOMSerializer</code> interfaces. 25: * <p> The parameter names used by the <code>DOMConfiguration</code> object 26: * are defined throughout the DOM Level 3 specifications. Names are 27: * case-insensitive. To avoid possible conflicts, as a convention, names 28: * referring to parameters defined outside the DOM specification should be 29: * made unique. Because parameters are exposed as properties in the , names 30: * are recommended to follow the section 5.16 Identifiers of [Unicode] with the addition of the character '-' (HYPHEN-MINUS) but it is not 31: * enforced by the DOM implementation. DOM Level 3 Core Implementations are 32: * required to recognize all parameters defined in this specification. Some 33: * parameter values may also be required to be supported by the 34: * implementation. Refer to the definition of the parameter to know if a 35: * value must be supported or not. 36: * <p ><b>Note:</b> Parameters are similar to features and properties used in 37: * SAX2 [<a href='http://www.saxproject.org/'>SAX</a>]. 38: * <p> The following list of parameters defined in the DOM: 39: * <dl> 40: * <dt> 41: * <code>"canonical-form"</code></dt> 42: * <dd> 43: * <dl> 44: * <dt><code>true</code></dt> 45: * <dd>[<em>optional</em>] Canonicalize the document according to the rules specified in [<a href='http://www.w3.org/TR/2001/REC-xml-c14n-20010315'>Canonical XML</a>], 46: * such as removing the <code>DocumentType</code> node (if any) from the 47: * tree, or removing superfluous namespace declarations from each element. 48: * Note that this is limited to what can be represented in the DOM; in 49: * particular, there is no way to specify the order of the attributes in the 50: * DOM. In addition, Setting this parameter to <code>true</code> will also 51: * set the state of the parameters listed below. Later changes to the state 52: * of one of those parameters will revert "canonical-form" back to 53: * <code>false</code>. Parameters set to <code>false</code>: "entities", " 54: * normalize-characters", "cdata-sections". Parameters set to 55: * <code>true</code>: "namespaces", "namespace-declarations", "well-formed", 56: * "element-content-whitespace". Other parameters are not changed unless 57: * explicitly specified in the description of the parameters.</dd> 58: * <dt> 59: * <code>false</code></dt> 60: * <dd>[<em>required</em>] (<em>default</em>)Do not canonicalize the document.</dd> 61: * </dl></dd> 62: * <dt><code>"cdata-sections"</code></dt> 63: * <dd> 64: * <dl> 65: * <dt> 66: * <code>true</code></dt> 67: * <dd>[<em>required</em>] (<em>default</em>)Keep <code>CDATASection</code> nodes in the document.</dd> 68: * <dt><code>false</code></dt> 69: * <dd>[<em>required</em>]Transform <code>CDATASection</code> nodes in the document into 70: * <code>Text</code> nodes. The new <code>Text</code> node is then combined 71: * with any adjacent <code>Text</code> node.</dd> 72: * </dl></dd> 73: * <dt> 74: * <code>"check-character-normalization"</code></dt> 75: * <dd> 76: * <dl> 77: * <dt><code>true</code></dt> 78: * <dd>[<em>optional</em>] Check if the characters in the document are <a href='http://www.w3.org/TR/2004/REC-xml11-20040204/#dt-fullnorm'>fully 79: * normalized</a>, as defined in appendix B of [<a href='http://www.w3.org/TR/2004/REC-xml11-20040204/'>XML 1.1</a>]. When a 80: * sequence of characters is encountered that fails normalization checking, 81: * an error with the <code>DOMError.type</code> equals to 82: * "check-character-normalization-failure" is issued. </dd> 83: * <dt><code>false</code></dt> 84: * <dd>[<em>required</em>] (<em>default</em>)Do not check if characters are normalized.</dd> 85: * </dl></dd> 86: * <dt><code>"comments"</code></dt> 87: * <dd> 88: * <dl> 89: * <dt> 90: * <code>true</code></dt> 91: * <dd>[<em>required</em>] (<em>default</em>)Keep <code>Comment</code> nodes in the document.</dd> 92: * <dt><code>false</code></dt> 93: * <dd>[<em>required</em>]Discard <code>Comment</code> nodes in the document.</dd> 94: * </dl></dd> 95: * <dt> 96: * <code>"datatype-normalization"</code></dt> 97: * <dd> 98: * <dl> 99: * <dt><code>true</code></dt> 100: * <dd>[<em>optional</em>] Expose schema normalized values in the tree, such as <a href='http://www.w3.org/TR/2001/REC-xmlschema-1-20010502/#key-nv'>XML 101: * Schema normalized values</a> in the case of XML Schema. Since this parameter requires to have schema 102: * information, the "validate" parameter will also be set to 103: * <code>true</code>. Having this parameter activated when "validate" is 104: * <code>false</code> has no effect and no schema-normalization will happen. 105: * <p ><b>Note:</b> Since the document contains the result of the XML 1.0 106: * processing, this parameter does not apply to attribute value 107: * normalization as defined in section 3.3.3 of [<a href='http://www.w3.org/TR/2004/REC-xml-20040204'>XML 1.0</a>] and is only 108: * meant for schema languages other than Document Type Definition (DTD). </dd> 109: * <dt> 110: * <code>false</code></dt> 111: * <dd>[<em>required</em>] (<em>default</em>) Do not perform schema normalization on the tree. </dd> 112: * </dl></dd> 113: * <dt> 114: * <code>"element-content-whitespace"</code></dt> 115: * <dd> 116: * <dl> 117: * <dt><code>true</code></dt> 118: * <dd>[<em>required</em>] (<em>default</em>)Keep all whitespaces in the document.</dd> 119: * <dt><code>false</code></dt> 120: * <dd>[<em>optional</em>] Discard all <code>Text</code> nodes that contain whitespaces in element 121: * content, as described in <a href='http://www.w3.org/TR/2004/REC-xml-infoset-20040204#infoitem.character'> 122: * [element content whitespace]</a>. The implementation is expected to use the attribute 123: * <code>Text.isElementContentWhitespace</code> to determine if a 124: * <code>Text</code> node should be discarded or not.</dd> 125: * </dl></dd> 126: * <dt><code>"entities"</code></dt> 127: * <dd> 128: * <dl> 129: * <dt> 130: * <code>true</code></dt> 131: * <dd>[<em>required</em>] (<em>default</em>)Keep <code>EntityReference</code> nodes in the document.</dd> 132: * <dt> 133: * <code>false</code></dt> 134: * <dd>[<em>required</em>] Remove all <code>EntityReference</code> nodes from the document, 135: * putting the entity expansions directly in their place. <code>Text</code> 136: * nodes are normalized, as defined in <code>Node.normalize</code>. Only <a href='http://www.w3.org/TR/2004/REC-xml-infoset-20040204/#infoitem.rse'> 137: * unexpanded entity references</a> are kept in the document. </dd> 138: * </dl> 139: * <p ><b>Note:</b> This parameter does not affect <code>Entity</code> nodes. </dd> 140: * <dt> 141: * <code>"error-handler"</code></dt> 142: * <dd>[<em>required</em>] Contains a <code>DOMErrorHandler</code> object. If an error is 143: * encountered in the document, the implementation will call back the 144: * <code>DOMErrorHandler</code> registered using this parameter. The 145: * implementation may provide a default <code>DOMErrorHandler</code> object. 146: * When called, <code>DOMError.relatedData</code> will contain the closest 147: * node to where the error occurred. If the implementation is unable to 148: * determine the node where the error occurs, 149: * <code>DOMError.relatedData</code> will contain the <code>Document</code> 150: * node. Mutations to the document from within an error handler will result 151: * in implementation dependent behavior. </dd> 152: * <dt><code>"infoset"</code></dt> 153: * <dd> 154: * <dl> 155: * <dt> 156: * <code>true</code></dt> 157: * <dd>[<em>required</em>]Keep in the document the information defined in the XML Information Set [<a href='http://www.w3.org/TR/2004/REC-xml-infoset-20040204/'>XML Information Set</a>] 158: * .This forces the following parameters to <code>false</code>: " 159: * validate-if-schema", "entities", "datatype-normalization", "cdata-sections 160: * ".This forces the following parameters to <code>true</code>: " 161: * namespace-declarations", "well-formed", "element-content-whitespace", " 162: * comments", "namespaces".Other parameters are not changed unless 163: * explicitly specified in the description of the parameters. Note that 164: * querying this parameter with <code>getParameter</code> returns 165: * <code>true</code> only if the individual parameters specified above are 166: * appropriately set.</dd> 167: * <dt><code>false</code></dt> 168: * <dd>Setting <code>infoset</code> to 169: * <code>false</code> has no effect.</dd> 170: * </dl></dd> 171: * <dt><code>"namespaces"</code></dt> 172: * <dd> 173: * <dl> 174: * <dt> 175: * <code>true</code></dt> 176: * <dd>[<em>required</em>] (<em>default</em>) Perform the namespace processing as defined in . </dd> 177: * <dt><code>false</code></dt> 178: * <dd>[<em>optional</em>] Do not perform the namespace processing. </dd> 179: * </dl></dd> 180: * <dt> 181: * <code>"namespace-declarations"</code></dt> 182: * <dd> This parameter has no effect if the 183: * parameter "namespaces" is set to <code>false</code>. 184: * <dl> 185: * <dt><code>true</code></dt> 186: * <dd>[<em>required</em>] (<em>default</em>) Include namespace declaration attributes, specified or defaulted from 187: * the schema, in the document. See also the sections "Declaring Namespaces" 188: * in [<a href='http://www.w3.org/TR/1999/REC-xml-names-19990114/'>XML Namespaces</a>] 189: * and [<a href='http://www.w3.org/TR/2004/REC-xml-names11-20040204/'>XML Namespaces 1.1</a>] 190: * .</dd> 191: * <dt><code>false</code></dt> 192: * <dd>[<em>required</em>]Discard all namespace declaration attributes. The namespace prefixes ( 193: * <code>Node.prefix</code>) are retained even if this parameter is set to 194: * <code>false</code>.</dd> 195: * </dl></dd> 196: * <dt><code>"normalize-characters"</code></dt> 197: * <dd> 198: * <dl> 199: * <dt><code>true</code></dt> 200: * <dd>[<em>optional</em>] <a href='http://www.w3.org/TR/2004/REC-xml11-20040204/#dt-fullnorm'>Fully 201: * normalized</a> the characters in the document as defined in appendix B of [<a href='http://www.w3.org/TR/2004/REC-xml11-20040204/'>XML 1.1</a>]. </dd> 202: * <dt> 203: * <code>false</code></dt> 204: * <dd>[<em>required</em>] (<em>default</em>)Do not perform character normalization.</dd> 205: * </dl></dd> 206: * <dt><code>"schema-location"</code></dt> 207: * <dd>[<em>optional</em>] Represent a <code>DOMString</code> object containing a list of URIs, 208: * separated by whitespaces (characters matching the <a href='http://www.w3.org/TR/2004/REC-xml-20040204#NT-S'>nonterminal 209: * production S</a> defined in section 2.3 [<a href='http://www.w3.org/TR/2004/REC-xml-20040204'>XML 1.0</a>]), that 210: * represents the schemas against which validation should occur, i.e. the 211: * current schema. The types of schemas referenced in this list must match 212: * the type specified with <code>schema-type</code>, otherwise the behavior 213: * of an implementation is undefined. The schemas specified using this 214: * property take precedence to the schema information specified in the 215: * document itself. For namespace aware schema, if a schema specified using 216: * this property and a schema specified in the document instance (i.e. using 217: * the <code>schemaLocation</code> attribute) in a schema document (i.e. 218: * using schema <code>import</code> mechanisms) share the same 219: * <code>targetNamespace</code>, the schema specified by the user using this 220: * property will be used. If two schemas specified using this property share 221: * the same <code>targetNamespace</code> or have no namespace, the behavior 222: * is implementation dependent. If no location has been provided, this 223: * parameter is <code>null</code>. 224: * <p ><b>Note:</b> The <code>"schema-location"</code> parameter is ignored 225: * unless the "schema-type" parameter value is set. It is strongly 226: * recommended that <code>Document.documentURI</code> will be set so that an 227: * implementation can successfully resolve any external entities referenced. </dd> 228: * <dt> 229: * <code>"schema-type"</code></dt> 230: * <dd>[<em>optional</em>] Represent a <code>DOMString</code> object containing an absolute URI 231: * and representing the type of the schema language used to validate a 232: * document against. Note that no lexical checking is done on the absolute 233: * URI. If this parameter is not set, a default value may be provided by 234: * the implementation, based on the schema languages supported and on the 235: * schema language used at load time. If no value is provided, this 236: * parameter is <code>null</code>. 237: * <p ><b>Note:</b> For XML Schema [<a href='http://www.w3.org/TR/2001/REC-xmlschema-1-20010502/'>XML Schema Part 1</a>] 238: * , applications must use the value 239: * <code>"http://www.w3.org/2001/XMLSchema"</code>. For XML DTD [<a href='http://www.w3.org/TR/2004/REC-xml-20040204'>XML 1.0</a>], 240: * applications must use the value 241: * <code>"http://www.w3.org/TR/REC-xml"</code>. Other schema languages are 242: * outside the scope of the W3C and therefore should recommend an absolute 243: * URI in order to use this method. </dd> 244: * <dt><code>"split-cdata-sections"</code></dt> 245: * <dd> 246: * <dl> 247: * <dt> 248: * <code>true</code></dt> 249: * <dd>[<em>required</em>] (<em>default</em>)Split CDATA sections containing the CDATA section termination marker 250: * ']]>'. When a CDATA section is split a warning is issued with a 251: * <code>DOMError.type</code> equals to 252: * <code>"cdata-sections-splitted"</code> and 253: * <code>DOMError.relatedData</code> equals to the first 254: * <code>CDATASection</code> node in document order resulting from the split.</dd> 255: * <dt> 256: * <code>false</code></dt> 257: * <dd>[<em>required</em>]Signal an error if a <code>CDATASection</code> contains an 258: * unrepresentable character.</dd> 259: * </dl></dd> 260: * <dt><code>"validate"</code></dt> 261: * <dd> 262: * <dl> 263: * <dt><code>true</code></dt> 264: * <dd>[<em>optional</em>] Require the validation against a schema (i.e. XML schema, DTD, any 265: * other type or representation of schema) of the document as it is being 266: * normalized as defined by [<a href='http://www.w3.org/TR/2004/REC-xml-20040204'>XML 1.0</a>]. If 267: * validation errors are found, or no schema was found, the error handler is 268: * notified. Schema-normalized values will not be exposed according to the 269: * schema in used unless the parameter "datatype-normalization" is 270: * <code>true</code>. This parameter will reevaluate: 271: * <ul> 272: * <li> Attribute nodes with 273: * <code>Attr.specified</code> equals to <code>false</code>, as specified in 274: * the description of the <code>Attr</code> interface; 275: * </li> 276: * <li> The value of the 277: * attribute <code>Text.isElementContentWhitespace</code> for all 278: * <code>Text</code> nodes; 279: * </li> 280: * <li> The value of the attribute 281: * <code>Attr.isId</code> for all <code>Attr</code> nodes; 282: * </li> 283: * <li> The attributes 284: * <code>Element.schemaTypeInfo</code> and <code>Attr.schemaTypeInfo</code>. 285: * </li> 286: * </ul> 287: * <p ><b>Note:</b> "validate-if-schema" and "validate" are mutually 288: * exclusive, setting one of them to <code>true</code> will set the other 289: * one to <code>false</code>. Applications should also consider setting the 290: * parameter "well-formed" to <code>true</code>, which is the default for 291: * that option, when validating the document. </dd> 292: * <dt><code>false</code></dt> 293: * <dd>[<em>required</em>] (<em>default</em>) Do not accomplish schema processing, including the internal subset 294: * processing. Default attribute values information are kept. Note that 295: * validation might still happen if "validate-if-schema" is <code>true</code> 296: * . </dd> 297: * </dl></dd> 298: * <dt><code>"validate-if-schema"</code></dt> 299: * <dd> 300: * <dl> 301: * <dt><code>true</code></dt> 302: * <dd>[<em>optional</em>]Enable validation only if a declaration for the document element can be 303: * found in a schema (independently of where it is found, i.e. XML schema, 304: * DTD, or any other type or representation of schema). If validation is 305: * enabled, this parameter has the same behavior as the parameter "validate" 306: * set to <code>true</code>. 307: * <p ><b>Note:</b> "validate-if-schema" and "validate" are mutually 308: * exclusive, setting one of them to <code>true</code> will set the other 309: * one to <code>false</code>. </dd> 310: * <dt><code>false</code></dt> 311: * <dd>[<em>required</em>] (<em>default</em>) No schema processing should be performed if the document has a schema, 312: * including internal subset processing. Default attribute values 313: * information are kept. Note that validation must still happen if "validate 314: * " is <code>true</code>. </dd> 315: * </dl></dd> 316: * <dt><code>"well-formed"</code></dt> 317: * <dd> 318: * <dl> 319: * <dt><code>true</code></dt> 320: * <dd>[<em>required</em>] (<em>default</em>) Check if all nodes are XML well formed according to the XML version in 321: * use in <code>Document.xmlVersion</code>: 322: * <ul> 323: * <li> check if the attribute 324: * <code>Node.nodeName</code> contains invalid characters according to its 325: * node type and generate a <code>DOMError</code> of type 326: * <code>"wf-invalid-character-in-node-name"</code>, with a 327: * <code>DOMError.SEVERITY_ERROR</code> severity, if necessary; 328: * </li> 329: * <li> check if 330: * the text content inside <code>Attr</code>, <code>Element</code>, 331: * <code>Comment</code>, <code>Text</code>, <code>CDATASection</code> nodes 332: * for invalid characters and generate a <code>DOMError</code> of type 333: * <code>"wf-invalid-character"</code>, with a 334: * <code>DOMError.SEVERITY_ERROR</code> severity, if necessary; 335: * </li> 336: * <li> check if 337: * the data inside <code>ProcessingInstruction</code> nodes for invalid 338: * characters and generate a <code>DOMError</code> of type 339: * <code>"wf-invalid-character"</code>, with a 340: * <code>DOMError.SEVERITY_ERROR</code> severity, if necessary; 341: * </li> 342: * </ul></dd> 343: * <dt> 344: * <code>false</code></dt> 345: * <dd>[<em>optional</em>] Do not check for XML well-formedness. </dd> 346: * </dl></dd> 347: * </dl> 348: * <p> The resolution of the system identifiers associated with entities is 349: * done using <code>Document.documentURI</code>. However, when the feature 350: * "LS" defined in [<a href='http://www.w3.org/TR/2004/REC-DOM-Level-3-LS-20040407'>DOM Level 3 Load and Save</a>] 351: * is supported by the DOM implementation, the parameter 352: * "resource-resolver" can also be used on <code>DOMConfiguration</code> 353: * objects attached to <code>Document</code> nodes. If this parameter is 354: * set, <code>Document.normalizeDocument()</code> will invoke the resource 355: * resolver instead of using <code>Document.documentURI</code>. 356: * <p>See also the <a href='http://www.w3.org/TR/2004/REC-DOM-Level-3-Core-20040407'>Document Object Model (DOM) Level 3 Core Specification</a>. 357: * @since DOM Level 3 358: */ 359: public interface DOMConfiguration { 360: /** 361: * Set the value of a parameter. 362: * @param name The name of the parameter to set. 363: * @param value The new value or <code>null</code> if the user wishes to 364: * unset the parameter. While the type of the value parameter is 365: * defined as <code>DOMUserData</code>, the object type must match the 366: * type defined by the definition of the parameter. For example, if 367: * the parameter is "error-handler", the value must be of type 368: * <code>DOMErrorHandler</code>. 369: * @exception DOMException 370: * NOT_FOUND_ERR: Raised when the parameter name is not recognized. 371: * <br> NOT_SUPPORTED_ERR: Raised when the parameter name is recognized 372: * but the requested value cannot be set. 373: * <br> TYPE_MISMATCH_ERR: Raised if the value type for this parameter 374: * name is incompatible with the expected value type. 375: */ 376: public void setParameter(String name, 377: Object value) 378: throws DOMException; 379: 380: /** 381: * Return the value of a parameter if known. 382: * @param name The name of the parameter. 383: * @return The current object associated with the specified parameter or 384: * <code>null</code> if no object has been associated or if the 385: * parameter is not supported. 386: * @exception DOMException 387: * NOT_FOUND_ERR: Raised when the parameter name is not recognized. 388: */ 389: public Object getParameter(String name) 390: throws DOMException; 391: 392: /** 393: * Check if setting a parameter to a specific value is supported. 394: * @param name The name of the parameter to check. 395: * @param value An object. if <code>null</code>, the returned value is 396: * <code>true</code>. 397: * @return <code>true</code> if the parameter could be successfully set 398: * to the specified value, or <code>false</code> if the parameter is 399: * not recognized or the requested value is not supported. This does 400: * not change the current value of the parameter itself. 401: */ 402: public boolean canSetParameter(String name, 403: Object value); 404: 405: /** 406: * The list of the parameters supported by this 407: * <code>DOMConfiguration</code> object and for which at least one value 408: * can be set by the application. Note that this list can also contain 409: * parameter names defined outside this specification. 410: */ 411: public DOMStringList getParameterNames(); 412: 413: }
| GNU Classpath (0.95) |